Select The Pulse Form - Medisana 48500 Instruction Manual

Select the
therapy mode
and program
Select the pulse
form
91732 20110608_Buch.indb 33
MEDISANA TDP offers you four therapy modes and 100 preset programs,
whose parameters are provided in the tables beginning on page 15. In addition,
you can define yourself two programs in TENS mode and in one program in
EMS mode (see page 35).
Mode Therapy
TENS Pain therapy
EMS Muscle building
Deep TENS Deep pain treatment
Acupuncture Pain treatment, mobilisation
• Briefi l y press the button
lected mode blinks on the left edge of the display panel.
• Select the program
ton down to increase the program number
The recommended treatment points are shown on the fi gure
gram. You can fi nd examples of electrode positions on page 38.
The device can generate different current forms for the corresponding thera-
pies. They are classifi ed into biphasic and mono-phasic pulses. With bipha-
sic pulses, the current circulates between the electrodes. With mono-phasic
pulses, the current only fi lows in one direction.
Mono-phasic
Bi-phasic short
Bi-phasic long
• Briefl y pressing the button
selected pulse form appears on the display panel as a symbol
"M" to switch to the next therapy mode. The se-
>by briefi l y pressing the button
faster.
is only used to stimulate muscles at low frequen-
cies (up to 40 Hz).
is preferably used at high frequencies to relief pain.
The positive (rectangular upward curve) and nega-
tive (rectangular downward curve) part follow di-
rectly after one another without interruption.
is used at high frequencies (starting at 60 Hz) both
for pain relief and also for muscle stimulation at low
frequencies (2 to 40 Hz). The positive and negative
parts of the pulse are separated from one another
by span width.
"Memory" switches to the next pulse form. The
Application
GB
Programs
P-01 – P-10,
U-01 – U-02
P-01 – P-77, U-01
P-01 – P-05
P-01 – P-08
"P". Hold the but-
for each pro-
.
9
08.06.11 12:07