Tripp Lite SmartPro SMX2200XLRT2U Owner's Manual page 4

Mounting (Tower)
Mount all UPS models in an upright, tower position using included hardware. The user must deter-
mine the fitness of hardware and procedures before mounting.
1 Stand your UPS on its side with the LED/Control panel
at the top. Attach one rack mounting ear
of the UPS using included screws
mounting ears to the floor with user-supplied
hardware.
2
Rotate the LED/Control panel to view it easier while
the UPS is tower mounted. Insert a small screwdriver,
or other tool, in the slots on either side of the panel.
Pop the panel out; rotate it; and pop the panel back in
place.
to each side
A
. Attach the rack
B
4
1
2
B
A