ACTi ECD-200 Quick Installation Manual

16-channel megapixel h.265 video decoder with rj-45 video input, hdmi video output

Advertisement

Quick Installation Guide
ECD-200
16-Channel Megapixel H.265 Video Decoder
with RJ-45 Video Input, HDMI Video Output
V18.1213

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECD-200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ACTi ECD-200

  • Page 1 Quick Installation Guide ECD-200 16-Channel Megapixel H.265 Video Decoder with RJ-45 Video Input, HDMI Video Output V18.1213...
  • Page 2: Before You Start

    BEFORE YOU START Thank you for purchasing ACTi Video Decoder. This guide contains all the information you need to quickly set up the device via local display interface. For detailed instructions on installation and operation, please search for the product manuals on http://www.acti.com/downloadcenter.
  • Page 3 AT A GLANCE LED Indicators DC 12V Power Connector - Power LED (blue) RS-232 Connector Digital Input / Output Connector - System LED (orange) - Hard Disk LED (green) USB 3.0 (2) Audio Ouput HDMI Connector Ethernet Connector Memory Card Slot VGA Connector Audio Input Reset Button...
  • Page 4: Installation

    INSTALLATION The device can be mounted in three ways: Surface Mount, Pole Mount, or VESA Mount. How to Surface Mount? Use the six (6) supplied screws with tox to secure the device on a flat even surface. How to Install with VESA Mount? 1. Place the device in between a VESA mount (10 x 10) with the top side of the device facing the monitor while the bottom side facing the VESA mount.
  • Page 5: Connect The Device

    CONNECT THE DEVICE The example below displays a network with the Video Decoder and basic required peripherals to start using the device. USB Devices HDMI Monitor Default IP Address 10.0.0.10 DEVICE Network Switch Power Source 10.0.0.100 10.0.0.101 10.0.0.102 10.0.0.103 Network Cameras LOGIN 1.
  • Page 6: The User Interface

    THE USER INTERFACE Device List Live View Power Off View Grid User System Date & Time System Setup Logout Full Screen Capture Screenshot Press to manually trigger DI1 / DI2 DI1 and DI2 Status Indicators: Lights green when DI1 or DI2 is active CHANGE IP ADDRESS If your network has a DHCP server, the device will obtain the IP address automatically.
  • Page 7: Add Cameras

    ADD CAMERAS 1. On the Live View screen, click Add. 2. Click Add Camera from the pop-up menu. Or, click other network devices to add them in the ENR. You may also group devices by creating a group. However, for this quick installation guide, we will only cover adding cameras in general.
  • Page 8 CHECK LIVE VIEW After adding the cameras, the models are listed on the left panel of the Live View screen. 1. Create a page view on the right panel, click . Use to modify how many channels you want to see on the live view screen. 2.
  • Page 9: Manage Devices

    MANAGE DEVICES Managing the devices can be done from the Live View screen. Right-click on the device model from the left panel, then click to: • Rename the device name on the list • Delete the device from the list • Setup the camera settings (see below) Camera Settings From the Camera Settings screen, click the corresponding page tab to configure...
  • Page 10: System Setup

    • Log: Lists the system log of the device. Due to continuous product improvements, some contents may have changed from the time time this documentation was printed. Download the latest documentation, which shall prevail over the printed version provided in the package, from http://www.acti.com/downloadcenter. Quick Installation Guide...

Table of Contents