Table of Contents
Advertisement
9.5
Drive maintenance (see BSA on our website)
Lift the METO-SWT according to the instructions described in 9.4.
Clean the drive chain, cogwheels and rollers and remove any jammed leaf and string,
check this after each use.
A
Tension the drive roller chain if the play is more than 1 cm (A).
-
Loosen the four motor fixing bolts (B) one turn.
-
Tighten the clamping nut (C).
-
The chain tension must allow play of about 1 cm (A).
-
Then tighten the fixing bolts (B) again.
-
The chain of the METO-SWT was properly lubricated on delivery ex-factory. The chain
may only be lubricated if it feels dry. This means that the chain may only be lubricated
with oil after spraying for the first time (the factory coating will then have come off of the
chain).
Lubricate the chain with chain spray.
-
-
Lubricate the swivelling wheels straight blocker with oil.
-
Replace damaged wheels.
Translated user manual V3_EN
B
METO-SWT 7030.XX.XXXX
C
38 / 52
Advertisement
Table of Contents
