The functions below only appear on the display if they have been set by the service
engineer to "block shaped greenhouse" in his own menu.
A maximum of 26 sections (blocks) can be set from A to Z.
[NUMBER OF PATHS IN BLOCK SECTION A (to Z)]
Enter the number of contiguous paths of equal length.
[PATH LENGTH: SECTION A (to Z)]
Enter the length of the paths in this section.
The following is only applicable when function "Tapered garden" (slanting rear wall) is on
(to be set by the service engineer).
[NUMBER OF PATHS WITH GEER]
Key in the number of paths where the rear wall is slanting.
[DECREASE DISTANCE A PATH]
Key in the distance reduction per path in metres.
(Do not enter anything if the paths are longer!)
[INCREASE DISTANCE A PATH]
Key in the distance increase per path in metres.
(Do not enter anything if the paths are shorter!)
27 / 52
Translated user manual V3_EN
METO-SWT 7030.XX.XXXX