Table of Contents
Advertisement
8.2.10
MAIN SWITCH (7)
After use, always switch the METO-SWT off with the main switch by turning it to the
horizontal position, remove the key to prevent accidental use.
Also, the batteries must be recharged immediately after use.
Attention, the screen has a screen protection function and after certain period it
darkens, THE METO-SWT HAS NOT BEEN TURNED OFF!
6
6a
13
8.2.11
EMERGENCY STOP (6a)
With the EMERGENCY STOP button you switch off the METO-SWT if a dangerous
situation occurs. To unlock this function, pull out the button and press
8.2.12
START (6b)
With the START button you can activate automatic or manual screen functions.
8.2.13
MANUAL DRIVING ON THE CONCRETE PATH (13 & 14)
The throttle flippers (13 & 14) activate manual driving on the concrete path. This function
works independently of the touch screen and as soon as the following has been
completed.
Turn the METO-SWT spray trolley ON by turning the main switch (7) to the vertical
position, the display will ask for a password, key in 2678, the main menu appears on the
display.
The further the flippers (Stipo's) are operated/turned, the faster the METO-SWT will drive
and/or steer. If the flippers are turned equally far right and left, the METO-SWT will go
straight on, if necessary, adjustments can be made by hand.
Translated user manual V3_EN
6b
14
METO-SWT 7030.XX.XXXX
on the screen.
34 / 52
Advertisement
Table of Contents
