Table of Contents
Advertisement
[START GABLE SPRAY BEFORE GABLE]
Enter the number of metres that the wall sprayer starts spraying before the METO-SWT
has driven the preset number of metres. This function allows to spray extra pesticides at
the rear gable.
[TIME GABLE SPRAY]
Enter the period (seconds) that the wall spraying boom must spray the gable.
[GABLE SPRAY 2 OFF FROM GABLE]
Enter the number of metres over which wall sprayer 2 (if fitted) must remain spraying after
the METO-SWT has reversed in the direction of the main path.
[AFTERSPRAY DISTANCE]
Enter the distance that the METO-SWT must drive (spraying) after leaving the rails on the
main path.
Whether the METO-SWT spraying machine travels onto the main path while spraying
depends on option SIDESPRAY 1 BACKWARDS WHOLE PATH being activated. If this is
not activated, then this will be the distance that the METO-SWT must travel onto the path
to come out at the centre.
[NOZZLES TYPE (COLOUR)]
Enter the applied nozzle colour (type) by tapping the coloured input field. The yellow
nozzles are supplied as standard.
[SETPOINT PRESSURE]
Enter the desired pressure, it is recommended to check the actual pressure on the
pressure gauge of the boom while spraying.
[NUMBER OF ACTIVE NOZZLES]
Enter the number of nozzles to be sprayed with, this setting will cause the spray boom to
reach the desired pressure faster.
26 / 52
Translated user manual V3_EN
METO-SWT 7030.XX.XXXX
Advertisement
Table of Contents
