Level 2 Parameters Setting - Global BH 1793 Instruction & Parts Manual

Mode Setting
No.
start distance
Input the distance for needle thread trimmer motor to
release the trimmer at sewing start.
U24 Bobbin thread trimming release motion
start distance
Input the distance for bobbin thread trimmer motor to
release the trimmer at sewing start.
U25 Counter updating unit
Update Unit in sewing counter
U26 Forbid Changes at Counter
U27 Operation of machine at counter reaching set value
U50 Voice of Buzzer
OFF：Buzzer off
PAN：Control Panel Voice available
ALL：Voice of Control Panel and buzzer available
U100 Back Light Auto Off
OFF：No Auto Off
ON： Auto Off
U101 Back Light Off Wait Time
U200 Language Setting
U201 Select Language at Power-on

7.3 Level 2 Parameters Setting

① Set Parameter
n the interface of Mode Setting Level 3,
press to enter the interface for setting
parameters of Level 2 (as shown in the right
figure). For the operation methods, please take the
description in 7.2 Level 1 Parameter Setting for
reference
When some parameters are changed, the system
will display the "Modified" in the parameter
setting interface.
Press to quit the parameter setting interface
Computerized Control System for Square Buttonhole Machine
Parameter
78
Range Unit
0~15.0 0.1mm
1~30 1
ON、 OFF
ON 、OFF
OFF、PAN、
ALL
ON、OFF
1~9 1
Chinese,
English,
Turkish
ON、OFF
Default value
1.5mm
1
OFF
OFF
ALL
OFF
3s
Chinese
OFF