Standardization; Matters For Safe Using - Global BH 1793 Instruction & Parts Manual

General Information
Input Voltage
Motor
Size
Head Weight
Presser Specification：
Width
Sewing Length (Max)
Specification of Models

1.3 Standardization

The button using the common figure can be understood by the users from different countries.

1.4 Matters for Safe Using

Working Environment
Do not use this control device in the following environments:：
Power Voltage
Voltage fluctuation beyond ±10% of the standard voltage.
Capacity of power supply doesn't meet the requirement
Electrical Disturbance
Beside the wave launcher with strong electrical wave and magnetic field or the high cyclic
machine
Temperature/ Humidity
Temperature below 0℃ or above 50℃
Outdoors or the area directly shined by sun
Beside stove (heater).
Relating humidity below 5% or above 95% or the area without dew
Air
Dusty area or area with corrosive gas
Area that is easy to have air explosion or oil explosion
Vibration
If the location of the sewing machine usually has excessive vibration, please move the control
box to other place.
Installation
Control Box
Please install the control box according to the instruction
Attachments
Computerized Control System for Square Buttonhole Machine
Small AC Servo Motor 400W Direct Driving
Width 200mm、Height 360mm、Length 570mm
Presser 1 Presser 2
4mm 5mm
25mm 35mm
S：Standard K：Knitting
AC175V~AC265V
70Kg
Presser 3
5mm
41mm
2
Presser 5
3-6mm(Set at will)
10-120mm (Set at will)