Parameter Transfer - Global BH 1793 Instruction & Parts Manual

Computerized Control System for Square Buttonhole Machine

8.4 Parameter Transfer

① Display the Communication Interface
In communication interface, press:
A: Input parameters from U Disk to Operation Panel
B: Output parameters from Operation Panel to U Disk
※ When inputting patterns from U disk, user has to
save the parameters into the DH_PARA in the U
disk with name PS_Param.
※ When outputting patterns from operation panel,
user has to save the parameters into the DH_PARA
in the U disk with name PS_Param.
※ The parameter file is the binary file, which is
operated on the control panel. User can not change
that file manually on PC, or the file may be
damaged.
② Press Button A to Input Parameters from U Disk to
Operation Panel
A、Press to input the parameters and quit
B、Press to quit directly.
101
Communication