Assembly - Pro-Form 940 CE User Manual

ASSEMBLY

•• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
•• Assembly requires two persons.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you  nish all assembly steps.
•• Left parts are marked “"L”" or “"Left”" and right parts
are marked “"R”" or “"Right.”"
•• To identify small parts, see page 6.
1. Go to www.proformservice.com/registration
on your computer and register your product.
•• activates your warranty
•• saves you time if you ever need to contact
Customer Care
•• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
CUSTOMER CARE (see the front cover of this
manual) and register your product.
2. With the help of another person, place two pack-
ing inserts from the packing material under the
rear of the Frame (1) so that the Frame is lifted
off the floor. Have another person hold the
elliptical to prevent it from moving from side
to side until this step is completed.
Attach the Rear Stabilizer (3) to the Frame
(1) with four 5/16" x 2 1/2" Screws (88). Then,
remove the packing inserts and lower the Rear
Stabilizer.
•• In addition to the included tool(s), assembly
requires the following tool(s):
one Phillips screwdriver
one adjustable wrench
one rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
1
88
7
3
88