Table of Contents
Advertisement
A-l
HANDGUN
MANUAL
NO. 26-4
Page l-l
_-
SECTION 1
SAFETY SUMMARY
INTRODUCTlON
The following paragraphs provide safety guidelines for working safely
with Nordson@ adhesive and sealant application equipment. Some of
these guidelines are repeated- throughout the manual, along with
specific warnings and cautions not included here. These safety
guidelines cover:
l
Safety During Installation,
l
Safety During Operation,
.
Safety During Servicing,
l
Safety When Using Hot Melt Adhesives/Sealants,
Solvents and
Reactive Materials,
l
What to do if Molten Material Comes in Contact with the Skin.
Failure to follow these recommendations
may result in personal injury
from burns or electrocution and/or equipment and property damage.
EXPLANATION OF TERMS AND SYMBOLS
The following safety symbols and signal words are used throughout
this publication to alert the reader to personal safety hazards, or to
identify conditions that may result in equipment or property damage.
A
WARNING: This is a general warning. Failure to observe
this warning may result in personal injury or death.
A
WARNING: This means risk of electrical shock. Failure to
'r
observe this warning may result in personal injury or
death.
A
CAUTION: This is a general caution. Failure to observe
this caution may result in minor personal injury or
damage to property.
NOTE: This indicates important information. Failure to observe this
note may result in equipment damage.
Publication P/N 108 061
0 NORDSON CORPORATION 1993
All Rights Reserved
Issued 3/93
Advertisement
Table of Contents
