Table of Contents
Advertisement
A-l HANDGUN
MANUAL NO. 26-4
Page 3-l
SECTION 3
INSTALLATION
UNPACKING
No special unpacking instructions are necessary. Use normal care to
prevent damage to the handgun when unpacking.
INSPECTION
After unpacking, inspect:
a. The gun surfaces for evidence of shipping damage.
b. For loose electrical connections.
c. All fasteners for tightness.
d. If damaged, contact your Nordson representative.
SAFETY PRECAUTIONS
A
WARNING: This equipment contains energized electrical
'
t
components with potentials that could be fatal. Discon-
nect and lock out input electrical power before installing
or servicing this equipment.
A 'I
WARNING: To prevent electrical shock, always complete
the hose-to-gun
hydraulic and electrical connections
before connecting the hose to the bulk melter.
CIRCUIT BREAKER RETROFIT KITS
A
'r
WARNING: Failure to change the circuit breakers in the
gun channels of the System Sentry@ Control Console and
Bulkmelter Series 5000 Units could result in damage to
the guns and/or injury to the operator.
Before using the A-l Handgun with a System Sentry Control Console
or a Bulkmelter, the gun circuit breakers in these units must be
changed. Heated 120VAC guns are shipped with System Sentry Con-
trol Console kits, 240VAC guns with Bulkmelter kits. The kits include
installation instructions.
-
Publication P/N 108 061
0 NORDSON CORPORATION 1993
All Rights Reserved
Issued 3193
Advertisement
Table of Contents
