Table of Contents
Advertisement
A-l HANDGUN
MANUAL NO. 26-4
Page 8-l
SECTION 8
PARTS LISTS
Using The Parts Lists
Reference Numbers -
The number in the REF. column indicates
the number assigned to the part in the illustration preceding the list.
The code NS means the part is Not Shown in the illustration.
Notes
- A letter in the NOTE column refers to a note below the parts
list. Special attention should be given to noted parts.
Part Numbers
- Part numbers are given only for saleable parts or
kits. Parts that are not sold separately are sometimes shown for
clarity.
Descriptions -
Descriptions are indented to show the relationship
between parts for ordering purposes. A part indented once is a com-
ponent of the top level assembly, a part indented twice is a component
of both the first one level indented item above it and the top level as-
sembly. For example:
1 Ref. 1
Note
1 Part No. 1 Description
I QW. I
000 000
Top Level Assembly
1
1
A
000 000
l
Assembly or Part
2
2
000 000
. . Subassemblv or Part
1
If you order item 1, items 2 & 3 will be included.
If you order item 2, item 3 will be included.
If you order item 3, you will receive item 3 only
Part descriptions indented to kit descriptions are included in the kits,
and in the top level assembly.
Quantities -
Quantities given in all parts lists except recommended
spares lists are the quantities needed to assemble the next level as-
sembly The code "ASR" (As Required) is used for bulk items such as
tubing, which is ordered in increments of one foot.
Publication P/N 108 061
0 NORDSON CORPORATION 1993
All Rights Resewed
Issued 3/93
Advertisement
Table of Contents
