If Molten Material Comes In Contact With The Skin - Nordson A-1 Series Manual

MANUAL NO. 26-4
Page 1-6
A-l HANDGUN
IF MOLTEN MATERIAL COMES
IN CONTACT WITH THE SKIN
l
Do NOT try to remove the molten material from the skin.
l
Immediately immerse the affected area in cold, clean water. Keep
the affected immersed until the material has cooled.
l
Do NOT try to remove the cooled material from the skin.
. Cover the area with a clean, wet compress.
l
In cases of severe burns, look for signs of shock. If shock is
suspected, have the patient lie down, use blankets to preserve
body heat and elevate the feet several inches.
l
Call a physician immediately.
Issued 3/93
Q NORDSON CORPORATION 1993
All Rights Reserved
Publication P/N 108 061