Advertisement
MULTIMIKE REGISTRATION GUIDE
STANDARD REGISTRATION
MEDIA CONNECTOR REGISTRATION (OTHER REGISTERED COMPONENTS IN PLACE)
(Particularly valuable when Multimike is not easily accessible)
Note: Multimike systems do not use MIC 2 status lights.
For users adding a Media Connector or replacing a lost or malfunctioning Media Connector.
1.
Start with the Multimike plugged in and powered on.
2.
If replacing a Media Connector, make sure the malfunctioning Media Connector is
unplugged.
3.
Plug in the new Media Connector. The blue power light will turn on.
4.
Locate the registration button on the back panel marked "REGISTER"
5.
Use another registered functional component (existing Flexmike or Sharemike)
to trigger the registration function in Multimike. (For the purpose of these
instructions, it is assumed that a Flexmike is the the existing registered
component.)
•
Using a paperclip with the end straightened out, press and hold the
registration button for 3 seconds inside the registered Flexmike.
•
The #1 amber light will begin blinking on front of the Multimike.
6.
Briefly press the registration button on the Media Connector. The REGISTER light will begin blinking.
TONE
USB POWER
TREBLE
BASS
5V/1.5A
7.
After several seconds, the #1 light on the Multimike will turn
solid. The LINK light on front of the Media Connector will
begin blinking, then turn solid.
8.
The registration is complete. You can now plug any audio
source into the Media Connector to verify there is audio.
9.
Place system ID number (attached to the Multimike
Quickstart Guide) on the new Flexmike.
NOTE: if at any point, the Multimike or Media Connector
lights begin blinking rapidly, that indicates a registration
error. Unplug the Media Connector, then repeat steps 3-8.
Media Connector Back
AUDIO OUT
AUDIO IN
1
2
1
2
3
4
REGISTER
Media Connector Back
TONE
AUDIO OUT
1
2
1
USB POWER
REGISTER
TREBLE
BASS
5V/1.5A
MICROPHONE
AUDIO IN
TONE
POWER
1
2
MIN
MAX
MIN
MAX
TREBLE
BASS
Multimike Front
Solid lights
MICROPHONE
AUDIO IN
TONE
POWER
1
2
MIN
MAX
MIN
MAX
TREBLE
BASS
Multimike Front
USB POWER
5V/0.2A
REGISTER
USB POWER
MIC
LINE
+
5V/1.5A
AUDIO IN
BAL. AUDIO OUT
AUDIO OUT
AUDIO OUT/DC IN
Multimike
Back
AUDIO IN
TONE
AUDIO OUT
2
3
4
1
2
USB POWER
TREBLE
BASS
REGISTER
5V/1.5A
Registration
Registration
Button
Blinking lights
MICROPHONE
AUDIO IN
AUDIO OUT
POWER
MIN
MAX
MIN
MAX
MIN
Media Connector Front
Apply to system components to indicate which parts are registered
as a system. Keep registered items together when storing away.
334-0162-02-00-01
MICROPHONE
AUDIO IN
AUDIO OUT
LINK
POWER
MIN
MAX
MIN
MAX
MIN
MAX
Media Connector Front
AUDIO IN
1
2
3
4
Button
LINK
MAX
Registration ID Labels
10101
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
RETAIN EXTRA LABELS IN THE EVENT A COMPONENT IS REPLACED OR ADDED.
Advertisement
