Advertisement
MULTIMIKE REGISTRATION GUIDE
STANDARD REGISTRATION
REPLACING A FLEXMIKE (NO OTHER REGISTERED COMPONENTS IN PLACE)
Note: Multimike systems do not use MIC 2 status lights.
For users replacing a lost or malfunctioning Flexmike.
1.
Start with the Multimike plugged in and powered on.
2.
If replacing a Flexmike, make sure the malfunctioning Flexmike is powered off.
3.
Power on the new Flexmike. Both microphone 1 and 2 blue lights should start
blinking.
Blinking lights
4.
Open the Flexmike battery compartment and pull the battery out (leaving it
plugged in) to reveal the registration button.
5.
Using a paperclip with the end straightened out, briefly press the registration button on the back of the Multimike. The 1 and 2
lights will begin blinking on the Multimike.
6.
Briefly press the registration button on the Flexmike. The 1 and 2 lights will start blinking alternately.
USB POWER
5V/0.2A
REGISTER
MIC
LINE
+
AUDIO IN
BAL. AUDIO OUT
AUDIO OUT
AUDIO OUT/DC IN
7.
After several seconds, the #1 light on the Multimike will turn solid and the
#1 light on Flexmike will remain blinking, then turn solid.
8.
The registration is complete. You can begin speaking into the new
Flexmike to verify there is audio.
9.
Place system ID number (attached to Multimike Quickstart Guide) on the
new Flexmike.
NOTE: if at any point, the Multimike or Flexmike lights begin blinking
rapidly, that indicates a registration error. Turn the new Flexmike off and
repeat steps 4-9.
Power On
(NEW Flexmike)
MICROPHONE
AUDIO IN
TONE
POWER
1
2
MIN
MAX
MIN
MAX
TREBLE
Solid lights
MICROPHONE
AUDIO IN
TONE
POWER
1
2
MIN
MAX
MIN
MAX
TREBLE
BASS
USB POWER
5V/0.2A
REGISTER
USB POWER
MIC
LINE
+
5V/1.5A
AUDIO IN
BAL. AUDIO OUT
AUDIO OUT
AUDIO OUT/DC IN
Registration
Button
Blinking lights
BASS
Registration ID Labels
Apply to system components to indicate which parts are registered
as a system. Keep registered items together when storing away.
334-0162-02-00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
RETAIN EXTRA LABELS IN THE EVENT A COMPONENT IS REPLACED OR ADDED.
10101
00-01
00-01
00-01
00-01
00-01
00-01
Advertisement
