Viper CEX410 Use And Maintenance

Use and maintenance
Operating guidelines CEX410
Fill solution tank with fresh
water. Add low foam
detergent
Press handle switch and start cleaning by moving the machine backwards. When you near the end of your
cleaning path release the handle switch and continue a new cleaning path. Overlap slightly to insure no dirt
is missed
Optional upholstery nozzle for furniture
cleaning and optional floor tool for cleaning in
difficult areas available
Unplug the machine
July 2018
Plug in power cable
To install accessory: remove the suction hose on the lid and connect it to the
empty left connection. Connect the accessory suction hose in the lid and
connect the solution hose in quick coupling in the right bottom part. When
both are connected make sure the machine in parked on the stand and start the
machine with pump and suction buttons activated and start working with the
accessory.
Adjust handle for ergonomic
operator height
Switch on vacuum and
solution and Turn on the main
switch to start the machine
Adjust the brush pressure to
have the desired traction
according to your needs as
this changes with different
type of carpets