Necessary Repairing Tools - Makita DLM431 Manual

2 CAUTION
Repair the machine in accordance with "Instruction manual" or "Safety instructions".
Follow the instructions described below in advance before repairing:
Wear gloves.
·
In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what are the parts.
·
It is also recommended to have boxes ready to keep disassembled parts by group.
Handle the disassembled parts carefully. Clean and wash them properly.
·
If some bolts and screws are too tight, use Impact driver.
·
Tighten the bolts and the screws to the specified torque as shown in "7 TIGHTENING TORQUE SPECIFICATIONS".
3

NECESSARY REPAIRING TOOLS

Code No.
1R243 Round bar for arbor 14-100
1R252 Round bar for Arbor 30-100
1R285 Round bar for Arbor 11-50
Description
3 / 21
Use for
press-fitting Plane bearings 10
press-fitting Ball bearings 6200ZZ
removing Plane bearings 10