Makita DLM431 Manual page 10

4-3-2 Assembling
Fig. 4-3-2-1
[1] Put a wood under Deck to raise Wheels from the
ground.
[3] Shift Change lever to the position of Cutting height at 75mm.
[4] Hook Tension spring 16 with the hook with long nose pliers.
Change lever
[5] Shift Change lever to the position of Cutting height between 40 and 60mm, and assemble Cowling.
[6] Pass Terminal housing set through the square hole of Cowling, and assemble Terminal housing set to Cowling.
Change lever
Wood
Fig. 4-3-2-3
Fig. 4-3-2-4
Terminal
housing set
Square hole of
Cowling
10 / 21
Fig. 4-3-2-2
[2] Lift up Connecting rod and insert the pin into the hole of
Connecting rod.
Hole of Change lever
Connecting rod
Tension spring 16
Hook
Long nose pliers
Pin of
Connecting rod
Cowling