Mounting - eQ-3 MAX! Operating Manual

Hour:
• Now set the time and confirm settings with the
OK button.
Once the time and date were entered, the Wall Thermostat
switches to normal operation.
Date and time can be changed at any time via the menu
option "dAt" in the configuration menu.
If the MAX! Wall Thermostat was taught-in to the
MAX! LAN-Gateway the current date and time will
be transferred to the Wall Thermostat automatically.
You can either use screws or adhesive strips to mount the
MAX! Wall Thermostat to a wall in the frame supplied or
integrate it into an existing switch (please refer to sec. 8).
Adhesive strip mounting:
• Choose a site for installation. The surface on which
you are mounting the Wall Thermostat must be
clean, dry and greaseless.
• For mounting of the assembled Wall Thermostat,
attach the adhesive strips to the back side of the
mounting plate. You should be able to read the let-
ters on the back side (according to figure).
Minutes:

7. Mounting

31