Mounting On A Radiator - eQ-3 MAX! Operating Manual

batteries need to be replaced. After removing the batteries,
wait approx. 1 minute before inserting the new ones. This
device does not support battery operation.
Never recharge standard batteries. Doing so will
present a risk of explosion. Do not throw the batter-
ies into a fire. Do not short-circuit batteries.
Once the batteries have been inserted, the radiator
thermostat starts an adapter run. You can confirm this with
the Boost button. For more details, see the next section 7.
The radiator thermostat is easy to install, and can be done
without draining heating water or intervening in the heating
system. No special tools are required, nor does the heating
have to be switched off.
The union nut attached to the radiator thermostat can be
used universally and without accessories for all valves
with a thread size of M30 x 1.5 from the most popular
manufacturers such as
• Heimeier
• MNG
• Junkers
• Landis&Gyr (Duodyr)
• Honeywell-Braukmann
• Oventrop Typ A, Oventrop AV6
• Schlösser
• Comap D805
• Valf
• Sanayii
28

6. Mounting on a radiator