Wolf NEW PACER 100 Series Parts And Service Manual page 3

WOLF STRAIGUT KNIFE CLOTU CUTI1NG MACIIINES
Wolf Machine offers two basic machine models in the Straight Knife Cloth
Cutting Machines: The Stone Sharpener Series and The Belt Sharpener
Series. Both series are available in 5", 6", T, 8", 10" and 14" models. All have
the same great quality engineering that Wolf has built its reputation on!
Belt Sharpened
Stone Sharpened
Series Series
vm
&. XI
VI, VII &. X
The Wolf Belt Sharpened Series has a unique
emery belt sharpening head which produces an excep­
tionally fine honed, slick blade edge that is superior for
cutting finely textured materials and for special trim­
ming. Emery belts graded fine, medium, coarse and
very coarse are used to change the blade edge for cut­
ting medium to coarse or hard fabrics. A simplified
bevel adjustment control provides easy positive knife
bevel selection. (See #1 above and page 13). Emery
belt replacement is accomplished in seconds with a fin­
ger-tip quick-change mechanism (See #2 above &
page 12).
The Wolf Stone Sharpened Series is a stone sharp­
ened straight knife which is the most versatile and eco­
nomical machine for a wide variety of fabric cutting.
Tension can be adjusted to balance emery wheel pres­
sure with extreme sensitivity (See #3 above and pages 8
and 9). The mechanism is self locking to maintain positive
adjustment.
Millimeter Equivalents, Machines Sizes:
5"= 127mm; 6"= 152mm;
T'
= 178mm;
8" = 203mm; 10"= 254mm; 14"= 356mm.