How To Assemble; How To Clean; Specifications - Richell 70000 Instruction Manual

How to Assemble

1. Attach Right and Left Side Frames to Back Panel and Front Frame using Long bolts (8 locations).
2. Place Wooden Slatted Panels. Then, secure it by short bolts (4 locations).
Wooden Slatted Panel

How to Clean

l Wring a towel soaked in mild detergent and water, and gently wipe the product. After wiping, place the product in an airy and
shady location to avoid discoloration, deformation and molding.
l Do not use a scrub brush and/or polishing powder. It would cause discoloration or scratch.
l When using creosol or other disinfectants, make sure to dilute them as instructed to avoid discoloration and paint stripping.
l Do not use harsh chemicals such as thinner, benzene or alcohol. It would cause discoloration or paint stripping.

Specifications

803840 70000-6 / 4973655 50700-1
UPC/JAN
Dimension 35.4"W x 24.4"D x 16.9"H
Material Natural Wood and Plywood
l Please note that product specifications and design may change without prior notice for the purpose of quality improvement.
l There may be coating cracks at some joints and each product may experience different coloration of the wood grain as frames are
made of wood materials.
l If you find something wrong with this product, please let us know. Thank you!
l Use a Phillips - head screwdriver for assembly.
l Temporarily tighten the bolts at first, then thoroughly tighten all the bolts after assembling
the product on a flat surface.
Front Frame
Left Side Frame Back Panel
Right Side Frame
2
Perfect fit for 20 x 30" cushion
(Cushion not included)
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795 Fax (972) 641-8495
Visit us at www.richellusa.com
MADE IN VIETNAM