Tupperware Fusion Master Mincer Recipes And Cooking Manual

Fusion Master
Recipes and Cooking Guide
Instructions (See Product Insert For Pictures)
Read these instructions carefully before using this appliance and save them for future reference. The Fusion Master is intended for indoor household use only. Wash all the parts
that could come in contact with food before first use (see Cleaning Guidelines).

Assembly for Mincing

1. Ensure the suction foot's ring (L) is in the unlock position.
2. Place the suction foot (K) on a clean and stable countertop. Slide the hopper (E) into the suction foot's groove (J) (fig. 2).
3. To bond the suction foot to the countertop and lock the hopper to the foot, turn the ring (L) to its lock position. Make sure all the parts are locked together.
4. Slide the mincer screw (C) into the hopper. The metal end should be on the hopper's front side facing outward.
5. Fit the cutting fan (I) on the mincer screw with the flat side facing outward. When securing the fan, make sure the metal end of the mincer screw
is protruding. NOTE: The product will not work correctly if the flat side of the cutting fan faces towards the mincer screw (fig. 3).
6. Select and mount one of the mincer discs (B) onto the hopper's front with the tab fitting into
the groove on the hopper's front (fig. 3).
7. Follow the arrow towards the lock pictogram
on the screw ring. Turn the screw ring (A) counterclockwise gently with your index finger only. As soon as you feel resistance, turn an extra 90° (or ¼ of a turn) and then stop
turning.
8. Slide the crank (G) on the gear side of the screw and fix them together by rotating the crank screw (you can also do this after step 4).

How to use your mincer

1. Do not use the Fusion Master without any ingredients inside the hopper. This can cause damages to your product and is not covered by the Tupperware Guarantee.
2. After assembling the unit, place a bowl or container below the head to collect the minced food flowing through the mincer disc. NOTE: Completely thaw food but leave cold before
mincing. This product is intended for household use on boneless meat only. Check meat for bones or unwanted fat and remove before processing. Clean meat and dice into cubes
sized to fill the hopper. With fatty meats, smaller cubes work best.
3. Turn the crank clockwise to process the food. If necessary, use the plunger (F) to keep the food moving. Do not apply excessive force, as it will only make processing more difficult
and could damage your mincer. NOTE: Always use the plunger provided. Never use your fingers or any other utensils (spatula, knife, etc.).
4. Food may jam in the mincer screw during operation. Should this occur, turn the crank counterclockwise a few times to release the jam and then revert to the forward direction.
Again, do not apply excessive force. NOTE: Do not try to mince food with hard fibers (ginger, nuts, etc.).

How to make sausage

1. To create traditional or healthier sausages such as chicken sausage, mince food until you achieve desired texture and mixture. This can be done prior to using the sausage insert.
2. Assemble the sausage insert by following assembly steps 1–6. Slide the sausage insert (H) through the screw ring, align the cut-outs with the splines and slide into place on the
screw ring until you hear it click into place. Then, follow assembly step 7.
3. Slide the entire sausage skin over the sausage insert and knot the end. We recommend using type 32/34 hog casings.
4. To create the desired sausage tube, press the sausage skin around the sausage insert and control the squeezing pressure while processing the food. When finished, knot the other
end.
5. To create sausages of any length you prefer,
use your fingers to squeeze at the desired length and turn the sausage around its own axis once or twice. This can be done during or after all food is processed. Knot the end to
close the last sausage.

Cleaning Guidelines

Immediately after use, thoroughly clean all parts used to process food. The Fusion Master is dishwasher safe. However, it is recommended to hand wash and dry the metal parts and
the suction foot. If you clean the foot in the dishwasher, rinse it in clear running water immediately afterwards. Without attempting to completely remove it, gently push down on the
silicone tab of the foot to release water. Do not use abrasive cleaners, scouring pads, knives or other sharp utensils in contact with the silicone disc of the foot. Do not attempt to open
the foot. Do not let the cutting fan come in contact with other metal, ceramic or glass instruments, as this would damage its cutting edges.
Tupperware
Mincer
Fusion Master Mincer
Fusion Master Mincer Recipes
5. Baked Ragu Bolognese 21. Quinoa Burger
6. Beef & Blue Burgers 22. Southwest Turkey Burger
7. Black Bean Burgers 23. Thai Fish Burgers
8. Breakfast Sausage Patties
9. Chicken Chorizo Burger
10. Chicken Jalapeño Burgers
11. Chicken Nuggets
12. Chicken Parmesan Meatballs
13. Chipotle Beef Tacos
14. Crab Cake Burger
15. Feta & Red Pepper Turkey
Burgers
16. Hawaiian Chicken Burgers
17. Italian Chicken Burgers
18. Hidden Veggie Burgers
19. Mega Meatballs
20. Mexican Chicken Burger