Table of Contents
Advertisement
2.5.2
Installing an ASUS PIKE II card
1.
Remove the two (2) screws on the ASUS PIKE II card bracket (A), then remove the
ASUS PIKE II card bracket (B) from the chassis.
2.
Prepare the ASUS PIKE II card.
3.
Align the two (2) screw washers to the
two screw holes on the ASUS PIKE II
card (A), then secure the bundled screws
to the screw washers from the bottom of
the ASUS PIKE II card (B).
4.
Align and install the Cache Vault Flash
Module to the connector on the ASUS
PIKE II card (A), then secure the Cache
Vault Flash Module to the screw washers
with the bundled screws (B).
ASUS ESC8000 G4 Series
ASUS PIKE II
card bracket
2-23
Advertisement
Table of Contents
