Locate the three hooks on the footstand.
Position the hooks so that they align with the open slots on the support bar.
There are four positions on each of the three sets of open slots on the support bar. This lets you
choose the angle of the footstand.
Insert the footstand hooks into the support bar and push in slightly to make the connection.
At this point your phone should be starting up. Please continue reading to see
the features of the 7916 key expansion module, how to use them, and
After the 7916 Expansion module is installed, upon startup the buttons all show a steady amber light.
The Cisco logo, load name, segment name, and download percentage are displayed. After the firmware
is installed, the LCD screen refreshes, and the buttons all go off and any line appearances are displayed
in the LCD screen. You can then start using the Expansion Module.