Open The Side Cover; Changing Filters - SystemAir SAVE VSR 300 User Manual

Hide thumbs Also See for SAVE VSR 300:
Table of Contents

Advertisement

Available languages

Available languages

GB
Task
Checking and cleaning outdoor air
intake
Checking and cleaning roof cowl (if
fitted)
Cleaning of duct system
1. It is recommended to do this every 5 years and is normally carried out by authorized companies specialized in this area.
• Use original spare parts from Systemair only.
• Scan QR code on the type label to find a spare part list.
4.2

Open the side cover

Danger
• Make sure that the Mains supply to the unit
is disconnected before performing any
maintenance or electrical work!
Loosen the four knobs and loosen the Philips screw to
open the side cover.
4.3

Changing filters

The filters cannot be cleaned and must be changed as necessary. This is normally done 1–2 times per year depending
on the air pollution at the installation site.
It is very important to change filters regularly for perform-
ance and energy efficiency of the unit.
Each filter has a label with an part number for identifica-
tion. Provide this number when ordering new filters.
When it's time to change the filters an alarm is shown on the control panel display. When this occurs do the following:
1. Stop the unit by disconnecting the mains.
2. Open and remove the side cover. See chapter 4.2.
3. Pull out the filters towards you. Some force may be needed.
231243 |
1 year
6 months
X
X
Maintenance |
3 years
When necessary
X
1
Fig. 1 Open the side cover
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Save vsr 500

Table of Contents