IBM 5110 Series Maintenance Analysis Procedures page 234

ABC 0
1 1 1 1
AUXILIARY TAPE MAP
PAGE 2 OF 2
004
Bad F2 (Common and language ROS)
card.
005
Follow the instructions on the display lmtil
DSP MENU appears. Then:
-Enter 840
- Press EXECUTE
The 5106 MOl should now load and run.
If the PROCESS CHECK light comes on
GO TO MAP 0420, ENTRY POINT A.
Follow the instructions on the display.
When completed, return to this step.
-Press RESTART
-Do the test for the 5106 near the end of
the Select Magnet Service Check (see
MIM 221).
Is the tape motion rhythmic?
V N
006
Do the Tape Select Magnet Servie
Check (see MIM 221).
007
The 5106 tape select magnets are
operating properly
008
Go To Map 0420, Entry Point A.
009
Go To Map 0420, Entry Point A.
MAP 0850-2
.~.
01JAN79
"t
EC 836600 PEC 835541
MAP 0850-2