4 channel headphone amplifier with talkback/cue (8 pages)
Summary of Contents for Broadcast Tools 2x16 DA/RJ
Page 1
NOTE: We recommend the use of Chrome, Firefox or Safari as your browser. Due to the dynamic nature of product design, the information contained in this document is subject to change without notice. Broadcast Tools, Inc., assumes no responsibility for errors and/or omissions contained in this document. Revisions of this information or new editions may be issued to incorporate such changes.
INTRODUCTION CAUTION! Thank you for your purchase of the 2x16 DA/RJ Analog Stereo Distribution Amplifier, which we will refer to throughout the manual as the 2x16 DA/RJ. We are Broadcast Tools® confident that this product will give you many years of dependable service. This...
For lightning protection devices, check out www.polyphaser.com and www.itwlinx.com. UPS Standby Power System We recommend that you connect your 2x16 DA/RJ to a UPS system. A UPS helps minimize the risk to the 2x16 DA/RJ and provides power during a power outage. OVERVIEW...
6 for pinouts. Audio Output Connections The 2x16 DA/RJ provides balanced analog outputs on eight RJ45 audio jacks. Connect each load to the DA outputs, labeled "OUTPUTS” For unbalanced loads, use the "+" and GND terminals only. Do not connect the "-" terminal to ground.
If Broadcast Tools is notified, in writing, of a failure of any item manufactured by Broadcast Tools to conform to the foregoing Limited Warranty within one (1) year following the date of the Buyer’s acquisition of the item, and if the item is returned to Broadcast Tools in accordance with Broadcast Tools’...
Need help?
Do you have a question about the 2x16 DA/RJ and is the answer not in the manual?
Questions and answers