Table of Contents
Advertisement
(A) If the POC terminal is already installed on an AMiS arm, there is no need to dis-
mantle this setup. Instead, simply follow the instructions provided below.
1.
Remove the two screws at the top of the VESA mount plate (marked in red
below).
2.
Slide the POC-IPSM90PS power system onto the AMiS arm.
3.
The POC-IPSM90PS VESA bracket will fit the AMiS arm. Use four screws to
affix the POC-IPSM90PS system to the POC terminal and AMiS arm.
(B) If installing the POC-IPSM90PS system onto a stand, follow the instructions pro-
vided below.
1.
Align the VESA mount holes of the POC-IPSM90PS with the VESA stand holes.
2.
Attach the system to the stand using four screws.
13
POC-IPSM90PS User Manual
Advertisement
Table of Contents
