Table of Contents
Advertisement
3.2
Battery Storage
If the battery system or battery pack is stored in a warehouse for a long duration, the
following tasks must be performed:
1.
Always fully charge new batteries before moving to the warehouse.
2.
Before storing the battery and leaving it idle, recharge the battery to full capacity.
3.
If the battery is left unused or idle for a long duration, perform a full recharge
every 3 months.
4.
Ensure that the battery is switched off before storage by pressing the Power On/
Off button (circled in red below) and double checking that the green LED indica-
tor is off.
3.3
Troubleshooting
1.
If pressing the Power On/Off button does not switch on the DC-Out function (the
green LED indicator remains off), follow the steps outlined below.
a) Check that the power adapter is connected to the system's DC-IN port.
b) Check that the DC-IN cable screw lock (shown below, left port) is fastened
securely (the cable plug type may differ from that included with the product).
c) Check that the DC-Out cable (center port) is connected and the screw lock
is fastened tightly.
d) Check that the DC-Out cable is securely connected to the POC terminal/
host device.
e) If using the internal battery power, check that the battery is installed correctly
and has sufficient charge. To check the battery charge level, remove the
battery pack and press the battery capacity status button on the battery
pack.
19
POC-IPSM90PS User Manual
Advertisement
Table of Contents
