Advertisement
Zoom Sleeve Installation
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
Diagram B
ikelite.com
©
2017 Ikelite Underwater Systems
Diagram C
5509.15_Zoom_Sleeve_1-0117
Advertisement
