Adjustment Procedures - Panasonic Lumix DMC-F3P Service Manual

8.4.

Adjustment procedures

8.4.1. BF ADJUSTMENT(1) [ 1meter adjustment ]
[ PREPARATION ]
1. Perform the "8.3 Execute the Adjustment software "DscCalDi.exe"" in advance.
[ CAUTION ]
1. Do not apply any vibration to the camera during adjustment.
[ ADJUSTMENT CONDITION ]
1. Aim the specified Siemens star chart.
(As for Siemens star chart, refer to the "6 Service Fixture & Tools" section for details.)
[ ADJUSTMENT SETTINGS ]
1. Click on the pull down menu tag of the "Test".
(The Test item list is displayed.)
2. Choose the "Monitor" so that the LCD display displays monitoring image.
3. Set the camera unit and chart at 100 +/- 0.5cm.
4. Adjust the chart position so that the center of the chart is displayed to center of the LCD display.
By changing the Zoom condition, confirm that the center of the chart is displayed to center of the LCD display.
[ ADJUSTMENT ]
1. Click on the "Focus" button on the PC monitor.
(The Confirmation box is displayed.)
2. Click on "YES".
NOTE:
It takes few minutes for adjustment process.
29