Table of Contents
Advertisement
8.3.
Adjustment procedures
8.3.1.
Read Lens Barcode
1. Preparation of the SD CARD
a. Format the SD card.
b. Put PDCE575C.elf, LENSSN.TXT into the SD card on root directory.
c. Write the S/N of the lens onto the file LENSSN.TXT for example:0510520302735337124.
2. Input the Lens Barcode data
a. Set the battery to the camera.
b. Insert the SD card.
c. Press shutter button and power button at the same time and continuously until the calibration mode is displayed.
d. Select "UpdateOISFw" (fig.1-A), then press "MENU/SET" button (fig.1-B), then press "Down" key to start the auto CAL
process.
e. The parameters will be saved automatically once CAL process finish.
f. The LCD show "Read BarCode From SD Card OK!000" if succeed, show NG code if fail.
g. Turn off the power to complete calibration.
23
Advertisement
Table of Contents
