Cleaning Before Use; Before Using Your Unit - Kenwood KTF60X15 Installation Instructions Manual

installation
In some cases, the door seal may be crushed after prolonged storing pressure, resulting
to the door seal not able to close properly when reversed.
Follow the steps below to solve the issue:
• Peel off the door seal from the upper or lower corner and
warm it with a hairdryer; the warmth can allow the door
seal to return to its original form. Do not blow directly on
the unit as the warmth may damage other parts of the
unit.
• Rotate the door seal upside down so that the side
originally with the hinge stay with the hinge.
• Insert the door seal back into the door from the upper or
lower corner.
• If the issue still occurs, contact your local service centre for assistance.

cleaning before use

Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water
using a sponge or cloth. Wipe completely dry before replacing the drawers. Clean the exterior of
the unit with a damp cloth.
If you require more information refer to the Cleaning section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to
settle.

before using your unit

Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
180°
15