Starkey SurfLink Operation Manual page 7

Transmitter/Receiver RF Information
In Europe, the SurfLink Programmer operates in the
863-865 MHz band, with a 300 kHz necessary transmit
bandwidth and a 500 kHz receive bandwidth, using
GFSK FM modulation with an effective radiated power
of 3 dBm.
In North America, the SurfLink Programmer operates
in the 902-928 MHz band, with a 323 kHz necessary
transmit bandwidth and a 500 kHz receive bandwidth,
using GFSK FM modulation with an effective radiated
power of -7 dBm.
12
Guidance and Manufacturer's Declaration - Emissions
The SurfLink Programmer is intended for use in the electromagnetic
environment specified below. The customer or user of the SurfLink
Programmer should ensure that it is used in such an environment.
Emissions Test Compliance
RF Emissions
Group 2
CISPR 11
RF Emissions
Class B
CISPR 11
Harmonics
Class A
IEC 61000-3-2
Flicker
Complies
IEC 61000-3-3
Guidance and Manufacturer's Declaration – Immunity
The SurfLink Programmer is intended for use in the electromagnetic
environment specified below. The customer or user of the SurfLink
Programmer should ensure that it is used in such an environment.
Electromagnetic
Environment – Guidance
The SurfLink Programmer
must emit electromagnetic
energy in order to perform
its intended function. Nearby
electronic equipment may be
affected.
The SurfLink Programmer
is suitable for use in all
establishments, including
domestic, and those directly
connected to the public low-
voltage power supply network
that supplies buildings used
for domestic purposes.
13