Regulatory & Service Information; Important Safety And Usage Information - Starkey SurfLink Operation Manual

Markings and Symbols
The following markings and symbols are used in these
safety precautions and/or on the device label.
Class II equipment
Power from USB port
Data transfer indicator
Regulatory and Service Information
Classification
• Classification to the Medical Device Directive:
Class I.
• Classification to EN 60950-1 Class II Continuous
Operation.
• Any associated computer used with SurfLink
Programmer must be an EN 60950 (ISO 950)
approved computer.
6
Power Supply
• Operating Voltage: 5.0 vDC supplied from the
USB port of an EN 60950 (ISO 950) approved
computer.

Important Safety and Usage Information

Storage and Shipping Conditions:
• Temperature: -20 to 70° C, -4 to 158° F
• Humidity: 30 – 90%
• No condensation
Operating Conditions:
• Temperature: 15 - 35° C, 59 - 95° F
• Humidity: 30 – 90%
• No condensation
Avoid using SurfLink Programmer in areas subject
to the following conditions:
• Extreme heat or cold
• Static electricity
• Large amounts of dust
• Rough handling
Rough handling or dropping SurfLink Programmer can
cause damage. If you think you may have damaged
7