MP3 players. This guide provides easy step-by-step instructions for connecting and using SurfLink Media. SurfLink Media must be powered on and connected to the desired media input before your hearing instruments can receive a signal. Only ONE of the following connection setups needs to be followed to begin the use of SurfLink Media.
Page 3
Once SurfLink Media has been turned on it will begin to stream the audio signal. Once SurfLink Media has been turned on it will begin to stream the audio signal.
Page 4
Monaural if you are wearing one hearing instrument. 3. C onnect the opposite end of the optical/ TOSLINK cable into the optical/TOSLINK Binaural if you are wearing two hearing instruments. port on the back of SurfLink Media. 3. Place the microphone as close as 4. Place SurfLink Media in a desired possible to the speaker(s) of the Television with External Microphone Confi...
Page 5
1. Plug the power adaptor into the wall socket or other power source. ontrol Streaming Activation Power Control 2. Connect the power cord using the Power port (labeled 5) on the back of SurfLink Media. 3. Press the power button on the front of SurfLink Media. The power button glows blue Front View when the device is on. Optical Optical S/PDIF...
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. between the location of the SurfLink Media and where you want to be able to start streaming. Note: This equipment has been tested and found to comply with the limits for a Class B The blue light indicates the range position of SurfLink Media. A longer bar means increased digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide...
Need help?
Do you have a question about the SurfLink Media and is the answer not in the manual?
Questions and answers