Table of Contents
Advertisement
3
Connect Entry Keypad
ACTIVATING THE ENTRY KEYPAD
The provided Keypad has already been paired to your system. To activate:
1)
Remove the back by lifting on the snap (see Figure B.2)
2)
Pull out the plastic battery tabs, making sure the batteries remain in place
(see Figure B.3)
3)
Replace the back by inserting top tabs before snapping back into place.
4)
Plug the Power Cord into the back of the Keypad, then into a power outlet.
5)
Enter activation code *438#700.
a)
The screen will read "Registration successful" when complete
4
Keychain Remote
ACTIVATING THE KEYCHAIN REMOTE
You need to first start by deleting the old Keychain Remote(s). To do this, please follow the steps below:
1)
Go to Settings
Users
Select the User from the middle menu
(follow this process for all the users that have a keychain remote)
Next you can add the new Keychain Remote to the appropriate user(s)
1)
Go to Settings
Users
Select the User from the middle menu
follow the steps on the screen to complete the add process
5
Entry
Keypad
Click "Remove" next to the word Keychain.
Click "Add" next to the word Keychain and
For troubleshooting, please visit
www.lifeshield.com/support-center
B.1
Tabs
Tabs
B.3
B.2
Snap
Advertisement
Table of Contents
