Dell XPS 17 9700 Service Manual page 65

Hide thumbs Also See for XPS 17 9700:
Table of Contents

Advertisement

Table 12. System setup options—Passwords menu(continued)
Passwords
Table 13. System setup options—Update Recovery menu
Update Recovery
UEFI Capsule Firmware Updates
Enable UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
SupportAssist OS Recovery
BIOSConnect
BIOSConnect
Dell Auto OS Recovery Threshold
Table 14. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Wake on LAN/WLAN
Wake on LAN/WLAN
Default: OFF
Controls whether this computer allows BIOS updates via EUFI capsule update
packages.
Default: ON
Enables the computer to recover from a bad BIOS image, as long as the Boot Block
portion is intact and functioning.
Default: ON
NOTE:
BIOS recovery is designed to fix the main BIOS block and cannot
work if the Boot Block is damaged. In addition, this feature cannot work
in the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.
Controls flashing of the system firmware to previous revisions.
Default: ON
Enables or disables the boot flow for SupportAssist OS Recovery tool in the event of
certain system errors.
Default: ON
Enables or disables cloud Service OS recover if the main operating system fails to
boot with the number of failures equal to or greater than the value specified by the
Auto OS Recovery Threshold setup option.
Default: ON
Controls the automatic boot flow for SupportAssist System Resolution Console and
for Dell operating system Recovery tool.
By default, 2 is selected.
Displays the Service Tag of the computer.
Creates a system Asset Tag that can be used by an IT administrator to uniquely
identify a particular system. Once set in BIOS, the Asset Tag cannot be changed.
Enables the computer to turn on and go to boot when AC power is supplied to the
computer.
Default: OFF
Enables or disables the computer to turn on by a special LAN/WLAN signal.
System setup
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents