Egholm 2100 Operator's Manual
  1. Manuals
  2. Brands
  3. Egholm Manuals
  4. Blower
  5. 2100
  6. Operator's manual

Egholm 2100 Operator's Manual

Snow sweeper
Hide thumbs Also See for 2100:
Table of Contents

Advertisement

Quick Links

OPERATOR'S MANUAL
Snow sweeper
90101101-01 UK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Egholm 2100

Summary of Contents for Egholm 2100

  • Page 1 OPERATOR’S MANUAL Snow sweeper 90101101-01 UK...
  • Page 2 Reservations: As it is the Egholm policy to make continuous improvements, we reserve the right to alter the specifi- cations and equipment at any time without notice. Egholm Maskiner A/S accepts no liability for errors or shortcomings in the operator’s manual.

  • Page 3: Table Of Contents

    Tip the Snow sweeper up on the A-frame when the Salt and sand spreader behind, the Egholm you do not intend to use it for a long period to 2100 clears snow and leaves a non-slip path save wear on the brushes. behind it in one workflow.

  • Page 4: General Information

    1. General information 1.1 Safety Make sure no one is standing close to the machine while it is in use. M M a a k k e e s s u u r r e e t t h h a a t t n n o o o o n n e e i i s s n n e e a a r r t t h h e e m m a a c c h h i i n n e e w w h h i i l l e e i i t t i i s s i i n n u u s s e e a a s s t t h h e e r r e e i i s s a a d d a a n n g g e e r r o o f f c c r r u u s s h h i i n n g g .

  • Page 5: Ec Declaration Of Conformity For Machinery

    - has been manufactured in conformity with- the provisions of the Machinery Directive, Directive 98/37/EU The Egholm 2100 fitted with the cab FH 2100 (ROPS approved) - has been tested at the Danish Institute of Agricultural Sciences at Bygholm in conformity with directive 86/298/EEC concerning rear mounted, roll-over pro- tection structures of narrow-track wheeled agricultural and forestry tractors.

  • Page 6: Technical Data

    1. General information 1.3 Technical data Dimensions: Assembled: Storage di m ensi o ns: Length (L): 2,915 mm 750 mm Width (B): 1,370 mm 1,370 mm (wide model) Width (B): 1,220 mm 1,220 mm (narrow model) Height without cab (H): 600 mm 600 mm Height with cab...

  • Page 7: Assembly / Disassembly

    2. Operator’s manual 2.1 Assembly / Disassembly 1. It is recommended that the hydraulic hoses should be run over the guard of the Snow sweeper to keep them clear and free from dirt when the Snow sweeper is fitted. (Picture 1) 2.

  • Page 8: Important Before Start-Up

    2. Operator’s manual 10. Fit the hydraulic hoses which rotate the brush on the D-connectors on the right-hand side of the machine. (Picture 1) 11. Attach the hydraulic hoses with the rubber strap under the running board to ensure it runs correctly over the screen.

  • Page 9: Start-Up

    2. Operator’s manual 2.3 Start-up 1. Start the machine. (See the operator’s manual for the basic machine, section 2.2) 2. Lower the Snow sweeper by pushing lever A on the left-hand side of the machine down to position 2. (Picture 1) 3.

  • Page 10: Service And Maintenance

    3. Service and maintenance 3.1 Cleaning Daily cleaning and maintenance will extend the lifetime of both the machine and the attachment. Clean the Snow sweeper with water when it is no longer required for use. 3.2 Maintenance Location of lubrication nipple on the swivel Lubricating the bearings: The bearings for the brush axle and the bearing for the swivel on the Snow sweeper must be lubricated...
  • Page 11 Snow sweeper. 8. Reattach the hydraulic hoses. New cogs and chains can be ordered from an autho- rised Egholm distributor. Replacing the brush rings: 1. Tip the Snow sweeper with lever A on the left-hand Bolts and nuts that hold the bearing.
  • Page 12 3. Service and maintenance Storage outside the season: When the Snow sweeper is to be stored outside the season, it is recommended to remove any loose paint and to repaint any damaged areas. Tip the Snow sweeper up on the A-frame when you do not intend to use it for a long period to save wear on the brushes.

  • Page 13: Conditions

    Maskiner A/S has no control. The scope of warranty: 1) The Egholm warranty is only valid on presen- tation of the original receipt supplied with model description, serial number and date of purchase.

  • Page 14: Complaints

    We wish you many years of safe and satisfied use of your machine. Best regards Egholm Maskiner A/S - Transportvej 27 - DK -7620 Lemvig, telephone: +45 97 81 12 05, fax: 97811210 4.3 Disposal When —...
  • Page 15 Notes 1 1 5 5...
  • Page 16 Egholm Maskiner A/S * Transportvej 27 * DK-7620 Lemvig Tel.: +45 97 81 12 05 - Fax: +45 97 81 12 10 www.egholm.dk * egholm@egholm.dk...

Table of Contents