Fujitsu Supercomputer PRIMEHPC FX700 Operating Manual page 88

Appendix A BMC Driver Messages
[INFO] xos BMC 1008 - internal information Started the Emergency dump.
Meaning
An emergency dump request has begun.
Action
No action is necessary.
[INFO] xos BMC 1009 - internal information Started loading BMC driver.
Meaning
The BMC driver is being loaded.
Action
No action is necessary.
[INFO] xos BMC 1010 - internal information Started the notification of State notification.
Meaning
Status control has begun.
Action
No action is necessary.
[INFO] xos BMC 1011 - internal information Command Busy. Another command is executing.
[CODE]
Meaning
The current state is Busy because another command is being executed.
CODE: IPMI command code
Action
No action is necessary.
[INFO] xos BMC 1012 - internal information Could not accept the execution of the command
under kill termination. [CODE]
Meaning
The command cannot be executed because forced termination processing by kill is in progress.
CODE: IPMI command code
Action
No action is necessary.
[INFO] xos BMC 1013 - internal information Command was killed. [CODE]
Meaning
The command was killed.
CODE: IPMI command code
Action
No action is necessary.
[INFO] xos BMC 1014 - internal information Started unloading BMC driver.
Meaning
The BMC driver is being unloaded.
Action
No action is necessary.
70 C120-0089-02EN