Fujitsu Supercomputer PRIMEHPC FX700 Operating Manual page 9

Safety Precautions
FCC Class A Declaration of Conformity
The device may be marked with an FCC declaration, which would apply to the equipment covered in this
document unless otherwise specified herein. The declaration for other products will appear in the
accompanying documentation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules, and meets all requirements of the Canadian Interference-
Causing Equipment Standard (ICES-003) for digital apparatus. These regulations are designed to
provide reasonable protection against radio interference when the equipment is operated in a
residential installation. This product generates, uses, and can radiate radio frequency energy and, if
not installed and used in strict accordance with the instructions, may cause harmful interference to
radio communications. However, there is no warranty that interference will not occur in the conditions
at a particular installation. If the product causes harmful interference to radio or television reception
(which can be confirmed by switching the equipment on and off), the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit separate from that connected to the receiver.
- Consult a reseller or experienced radio/TV technician for support.
Fujitsu is not responsible for any radio or television interference caused by unauthorized modification
of this equipment or the substitution or attachment of connecting cables and equipment other than
those specified by Fujitsu. The user shall be responsible for correcting the interference caused by
such unauthorized modification, substitution, or attachment.
The use of shielded I/O cables is required when connecting the equipment to any optional peripheral
or host device. Failure to use shielded I/O cables may violate FCC and ICES regulations.
Manuals in This Series
The documentation can be found online.
For the Japanese market
https://www.fujitsu.com/jp/products/computing/servers/supercomputer/downloads/
For the global market
https://www.fujitsu.com/global/products/computing/servers/supercomputer/documents/
See the following table for an overview of the documentation.
Document
FUJITSU Supercomputer
PRIMEHPC FX700 Operating Manual
FUJITSU Supercomputer
PRIMEHPC FX700 Upgrade and
Maintenance Manual
FUJITSU Supercomputer
PRIMEHPC FX700 BMC User's
Guide
FUJITSU Supercomputer
PRIMEHPC FX700 Safety and
Regulatory Information
Manual Code
C120-0089EN Contains information about how to install, set up, and
operate the device. (Provided online)
C120-0090EN Contains device upgrade procedures and replacement
procedures for faulty hardware. (Provided online)
C120-0091EN Contains information about the BMC (Baseboard
Management Controller), which manages the
condition of the device. (Provided online)
C120-0092XA Contains important safety information. (Provided
online and as print version)
viii
Description
C120-0089-02EN