Installing The Appliance; Before You Start; Tools Required - Miele KF 2981 Vi Operating And Installation Instructions

Installation

Installing the appliance

Before you start

It is essential to read these operating
and installation instructions carefully
before starting to install the
appliance.
The refrigeration appliance should be
installed by a suitably qualified and
competent installer in accordance
with these operating and installation
instructions. Safe operation of the
appliance is only assured if it has
been installed and connected in
accordance with these operating and
installation instructions.

Danger of damage and injury
due to the appliance tipping over!
This refrigeration appliance is very
heavy and can tip forwards when the
door(s) is/are open.
Keep the appliance door(s) shut until
the appliance has been built in and
secured in its housing in accordance
with these operating and installation
instructions.
Due to the size and weight of the
appliance, installation must be
carried out by two people.
24

Tools required

– Cordless drill
– TX 20 screwdriver
– Hammer drill
– Drill bits in various sizes, depending
on materials
– Hammer
– Open-end spanner
– Ratchet wrench, attachment: 8 mm
socket
– Adhesive tape
– Utility knife
– Pipe wrench
– Spirit level
– Tape measure
– Pencil
– Try square
Other
– Step ladder
– Hand trolley