Installation
While holding the anti-tip brackets in
place, mark the drill holes on the rear
wall of the installation niche.
The accessory pack supplied
contains fastening screws for various
applications/materials:
Securing to a concrete wall
Securing to a wooden wall
30
Securing with a wooden wedge
Secure the housing unit to the wall
behind it and/or above it as required
using the anti-tip brackets .
Connect the refrigeration appliance to
the mains water supply (see
"Installation - Water connection").
Pushing the appliance into the niche
Push the appliance into the niche,
taking care not to damage the
electrical and mains water
connections.
If you are installing several
refrigeration appliances side by side,
secure the appliances to one another
now (see the instructions of the side-
by-side installation kit).
To ensure that the refrigeration
appliance can then be aligned
correctly, the plinth must be removed
from the appliance base: