Switching Condensation Protection  On And Off; Switching On The Door Assistant - Miele KF 2981 Vi Operating And Installation Instructions

Selecting further settings
Switching Condensation
protection  on and off
The door pillar of the upper left
appliance door (see "Guide to the
appliance") features integrated heating.
Switch the heating on if you notice
condensation on the door pillar
between the fridge zone doors or on the
door seals.
Please note that energy consumption
increases slightly when
the Condensation protection
on.
 In Settings mode , use the 
and  sensors to select
and select OK to confirm
protection
your selection.
 Touch the sensor  if you wish to
terminate the process.
 Use the  and  sensors to select
On or Off and confirm your selection
with OK.
70
Switching on the Door
assistant 
You can choose between the two Door
assistants
The factory default Door assistant is
Push2open
The
suitable for furniture fronts without
handles. The door will open
automatically when you gently press
against it.
The
is switched
for furniture fronts with handles. The
appliance door can be opened easily
and with little effort.
Condensation
Push2open
.
Door assistant is
Push2open
Pull2open Door assistant is suitable

Risk of damage if the appliance
door is closed prematurely.
When the Door assistant is switched
on, repeatedly closing the appliance
door early can lead to damage or
malfunctions.
Refrain from holding onto or closing
the appliance door while the
automatic door opening is still
extended. If you have closed the
appliance door despite this, leave it
closed for 5 minutes. The automatic
door opening will reset itself.
You can switch on the Door assistant
separately for the fridge zone or the
freezer zone only. Use the  and 
sensors to select the required zone
and confirm your selection with OK.
and Pull2open .