Noise Emission; Connection Of Low-Pressure-/ High Pressure Line - Moog RKP-II User Manual

15.6

Noise emission

Radial piston pumps have a low primary noise level. The noise emission of the whole hydraulic power
unit however is highly depending on the installation of the pump and the laying of the lines. Avoid the
propagation of structure borne noise to radiating, large surface machinery parts through:
- install pump with a damping flange
- use tube lines instead of pipes
- fix pipelines with flexible clamps
15.7

Connection of low-pressure-/ high pressure line

Connection of the low-pressure line at adapter A, connection of the high pressure line at port B.
Further information  see chapter 5, chapter 6, User Manual RKP-II.
Moog GmbH Benutzerinformation RKP-II für explosionsgefährdete Bereiche (CA57626, Version 1.3, 12/09)
Installation
21