Braun Oral-B TRIUMPH 5000 WIRELESS SMARTGUIDE Manual page 5

Visible pressure indicator
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Please note that your SmartGuide display will
self-activate this demonstration mode when
you do not use your toothbrush for 28 days.
You can avoid this self-activation by setting
the clock or synchronizing your handle.
h /m in
s e t
2
1
• A flashing «12:00» on the SmartGuide display
indicates that time can be adjusted. Press the
«set» button, located in the battery compart-
ment, until «12 h» is displayed.
• By briefly pressing the «h/min» button, you
can toggle between a «12 h» or «24 h»
daytime format. Push the «set» button to
confirm your choice.
h/min
• Then the hour digit starts flashing. Press the
«h/min» button until the right hour appears
and confirm with the «set» button. Proceed
the same way to set both minute digits. If you
prefer not using this clock feature, the flashing
«12:00» will disappear automatically after 24h.
h/min
You can start your toothbrush by pressing the
on/off button (b). To avoid splashing, guide the
brush head to your teeth before switching on
the appliance.
h /m in
s e t
h/min
Connecting and charging
Your toothbrush has a waterproof handle, is
electrically safe and designed for use in the
bathroom.
To assemble the charging unit, insert the
protective cover (h) on the back of the base
plate (g). Then, place the base plate on the
charging ring (f) until it clicks into place.
• Plug the SmartPlug into an electrical outlet
and place the toothbrush handle (d) on the
charging unit. A battery symbol should appear
in the handle display (e). The battery symbol
will fill up while the handle is being charged.
Once the handle is fully charged, the battery
symbol will be filled with four bars. A full
charge takes at least 10 hours to complete
and allows for approximately 10 days of
regular brushing (twice a day, 2 minutes).
Please note: If the battery symbol is not
displayed immediately, continue charging.
It will appear in 10–15 minutes.
• When the rechargeable battery is low, the
battery symbol with one remaining bar starts
flashing. Your toothbrush will slow down
and then stop. When the battery is fully
discharged, the empty frame of the battery
symbol flashes. It will then need a 15-minute
charge before you can use it for a 2-minute
brushing.
• For everyday use, the toothbrush handle can
be stored on the charging unit to maintain it at
full power. There is no risk of overcharging the
battery. However for environmental reasons,
Oral-B recommends to unplug the charging
unit until the next recharge is required.
• To maintain the maximum capacity of the
rechargeable battery, unplug the charging unit
and fully discharge the handle with regular use
at least every 6 months.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents