A&D EK-i Series Instruction Manual page 31

1. Press and hold the calibration (CAL) switch.
appears after
CC
switch when CC
2. CC 0 is displayed.
3. Press the SAMPLE key and change the weight
value using the following keys.
SAMPLE key
RE-ZERO key
PRINT key
4. At step 2, press the PRINT key. The zero point is
weighed and the weighed value is displayed for a
few seconds.
5. Place a weight, of the same value as displayed, on
the pan. Press the
weighed value is displayed for a few seconds.
. Release the
Cal
is displayed.
To select the digit blinking to
change.
To set the value of the digit
selected.
To store the value and return
to step 2.
PRINT key to weigh it. The
29
02000. 0
CC 0
2000. 0
Calibration
weight
Weighing
pan